The Fully Automatic Lee Precision Pro 1000 3-hole Reloading Kit for the .45 ACP (Automatic Colt Pistol), can get a loaded cartridge with each pull of the lever. Primers, like powder, are fed only if a case is present. Alternate loading sequence lets you load one case at a time. Great kit for beginners. Can change calibers in minutes. Another feature is the ergonomic roller handle with all-steel linkage.

WORLD'S FASTEST HANDLOADING PRESS

INCLUDES:

• Pro 1000 Press
• Full Length Sizing Die
• Powder Through Expanding Die
• Bullet Seating Die
• 3-Hole Turret
• # 2 Shell Plate
• Pro Auto Disk Powder Measure
• Ergo Wood Roller Handle
• Large Case Feeder
• Priming System
• Case Sensor

FEATURES:

• Press Type: Progressive Press
• Auto Index: Yes
• Number of Stations: 3
• Frame Material: Steel, Cast Aluminum and Polymer
• Handle Location: Bottom Right or Left
• Die Size Accepted: 7/8"-14 Threaded Dies
• Die Bushing Accepted: No
• Die Bushing Brand Used: N/A, Utilizes 3 Hole Turrets (Comes with 1)
• Spent Primer Collection System
• Ram Stroke: 3-1/2"
• Priming Feature: Uses the Lee Pro 1000 Primer Attachment
• Number of Mounting Holes: 3
• Mounting Hardware Included: No

NOTES:

• This Press only accepts the Lee Precision 3-Hole Turret
• Please note that the Lee Pro Auto-Disk powder measure (included as part of the kit) will only work with Lee powder-through expanding dies.
• To reload more than one caliber this press is easily changed over. All that is needed is an extra turret and the appropriate shell plate carrier (sold separately), some cartridges might require the Lee Auto-Disk Powder Measure Double Disk Kit (Item# 90195)
• For Instructions and more information, click on the "Man" Icon
• Warranty: Lee Precision 2 year Unconditional Guarantee.

PHOTO NOTE:

• The Lee Reloading Stand shown in the photo is not included.

WARNING:

• Only CCI or Remington brand primers are safe to use with this press.
• Some 45 ACP brass now have small primer pockets. Do not attempt to load these cases with large primer feed on the Pro 1000, else explosion and damage to tool is likely to occur. You will need to sort your brass, and order the small primer feed to load these cases.
  

IT IS YOUR RESPONSIBILITY TO ENSURE THE SAFETY OF YOUR LOADS

FACTORS THAT WILL INCREASE PRESSURES. SOME WILL BE DANGEROUS:

• DO NOT USE more powder than recommended
• DO NOT USE a heavier bullet than recommended
• DO NOT SEAT the bullet deeper than normal
• DO NOT USE magnum primers unless using a slow burning ball powder
• Greatly oversize bullets, excessively hard bullets or cases that are too long will cause higher pressures
• High temperatures or cartridges that were stored in a hot car or trunk will produce higher pressures